Confluence — Twin Face Stone Sculpture
Confluence — Twin Face Stone Sculpture
Two faces in profile, carved cheek to cheek from a single block so that they read as one mass rather than two figures. The planes are cut flat and angular in the cubist manner, with the features reduced to the minimum needed to register a human presence — a brow, a closed eye, the line of a mouth.
The piece is worked in warm beige sandstone with a finely textured surface that holds light softly rather than reflecting it, and is raised on a matching stone plinth cut from the same block run. Set outdoors the stone will develop a gentle patina; indoors it stays close to its original tone.
Carved by hand from rough block to finished surface by a single carver. Made to order and hand-inspected before crating. Alternative stones, scales and commissions are available on request.
Specifications
Hand-carved from a single block of natural sandstone. Two faces in profile worked cheek to cheek as one continuous mass, with flat cubist planes and reduced features. Raised on a matching stone plinth. Worked from rough cut to final polish by a single carver and hand-inspected before crating.
Dimensions
Standard height: 3-4 ft (approx. 900-1200 mm), including plinth Width and depth: proportioned to the chosen height Weight: confirmed at quotation - varies with stone density and final size MADE TO YOUR DIMENSIONS. Scale is set at commission. Larger and smaller versions are available, and the plinth can be sized to your setting. Send your requirement and we will confirm the exact specification, weight and freight before carving begins.
Materials
Solid natural sandstone, hand-selected Stone shown: Beige sandstone Also available in marble or Mocha limestone on request Finish options: Polished, Honed, Leather
Installation
Freestanding placement on a floor, plinth or surface rated for the sculpture's weight. Felt or rubber isolation pads recommended on polished or timber surfaces. White-glove placement available in select regions - ask your consultant.
Care
Dust with a soft, dry cloth. Clean with a pH-neutral stone cleaner only where required. Reseal every 12 months with a stone-safe sealant. Avoid acidic, alkaline, or abrasive cleaning products.
Warranty
5-year structural warranty against manufacturing defects. Natural veining, tonal variation, inclusions and mineral markings are inherent characteristics of solid stone and are not considered defects.
Shipping
Production time: 6-8 weeks from order confirmation, as each piece is made to order. Worldwide shipping via specialist freight carriers with full crating and insurance typically adds 2-3 weeks in transit. See our Shipping Policy page for full details.
Downloads
Downloadable files for this piece will be added soon. Contact us directly for CAD drawings or spec sheets in the meantime.